Warewashing
Warewashing Machines and Equipment
ALTO 130
Overview
Ultra compact machine, 1150mm long, capable of washing up to 130 racks per hour. Complete with double skin, auto timer and Type 'A' Air gap. The Alto 130 also incorporates self draining wash pump and radiused corners throughout to ensure optimum hygiene. Access to the interior of the machine is easily gained via a full width door. With power wash and rinse zone with optional dryer available.
- Alto 130 Power wash zone and rinse zone
- Alto 130D Power wash zone, rinse zone and hot air drying zone.
- Alto 130CD Power wash zone, rinse zone and corner hot air drying zone.
Specifications
| Width | 1150 mm |
| Depth | 770 mm |
| Height - Door open | 2025 |
| Length | 1150mm |
| Height | 1565 mm |
| Maximum plates per rack | 18 |
| Wash chamber height | 400 mm |
| Operating level | >64 dB |
| Weight - Net | N/A |
| Built in air gap (water council approved - WRC) | Yes |
| Rinse Booster Pump | Yes |
| Built in detergent dispenser | Optional |
| Built in rinse aid dispenser | Optional |
| Double skinned cabinet | Yes |
| Racks per hour | 100/130 |
| Cycle Times | 100/130 racks per hour |
| Water connection | 3/4 |
| Water inlet height from floor level | 226 mm |
| Required water pressure | 1-3 bar |
| Required water flow (inlet solenoid valve capacity at 3 bar) | 15 Ltrs/min |
| Maximum Drain Height from floor level | 171 mm |
| Drain Size | 1 |
| Amps required - 3 Phase - Water fed @ 40°C | 32 Amps |
| Amps required - 3 Phase - Water fed @ 10°C | 40 Amps |
| Total connected load - Water fed @ 40°C | 17.5 kW |
| Total connected load - Water fed @ 10°C | 27 kW |
| Pre wash tank heating | N/A |
| Wash tank heating | 8 kW |
| Rinse boiler heating - Water fed @ 40°C | 16 kW |
| Rinse boiler heating - Water fed @ 10°C | 25.5 kW |
| Pre wash pump size | N/A |
| Pre wash pump capacity | N/A |
| Pre wash tank capacity | N/A |
| Pre wash tank operating temperature | N/A |
| Wash pump size | 1.1 kW |
| Wash pump capacity | 750 Ltrs/min |
| Wash tank capacity | 70 Ltrs |
| Wash tank operating temperature | 55°C |
| 4 Eco stage rinse | No |
| Rinse boiler operating temperature | 85°C |
| Rinse water consumption | 260 Ltrs/min |
| Rinse boiler capacity | 17 Ltrs |
| Drying tunnel | Optional |
| Corner drying tunnel | Optional |
| Drying tunnel loading | 6.4 kW |
| Drying tunnel length | 600 mm |
| Drying tunnel circulation | 1150 m/3/hr |
| Drying tunnel relative humidity | 25% |
| Heat recovery unit | Optional |
| Circulation | 700 m/3/hr |
| Reduction in electrical loading | 5 kW |
| Steam condenser unit | Optional |
| Cold water consumption | 270 Ltrs/hr |
| Exraction spigot | Optional |
| Diameter | 250 mm |
| Integral extraction fan | Optional |
| Autotimer | Standard |
| Product Type | Rack Machines |
| Range | ALTO |
| Model Number | |
| Order code | ALTO 130 |
| Dimensions | 1150 x 770 x 1565/2025mm |
| Rack Size | 500 x 500mm |
| Electrical loading | Hot fill 17.5kW / Cold fill 27.0kW |
| Chemical Dispensers | Optional |
| Air gap / Air break | Yes |
| Booster Pump | Yes |
With both power pre-wash and main wash this machine is 1970mm long, capable of washing up to 170 racks per hour. Complete with double skin, auto timer and Type 'A' Air gap.
Incorporating power pre-wash and main wash sections, 2370mm long, capable of washing up to 220 racks per hour. Complete with double skin, auto timer and Type 'A' Air gap.
Incorporating power pre-wash and main wash sections, 2370mm long, capable of washing up to 280 racks per hour. Complete with double skinning, auto timer and Type 'A' Air gap.
