Rack Conveyor Dishwashers

ALTO 280

A rack conveyor dishwasher, Incorporating power pre-wash and main wash sections, 2370mm long, capable of washing up to 280 racks per hour. Complete with double skinning, auto timer and Type 'A' Air gap. The Alto 280 incorporates 'XX'tra powerful self draining wash pump and radiused corners throughout to ensure optimum hygiene. The unique rinsing system limits water consumption to just 1 litre per rack. Access to the interior of the machine is via full width doors. With power pre wash zone, power wash zone and 4 stage eco rinse.

- Alto 280 Power pre wash zone, power wash zone and 4 stage eco rinse.

- Alto 280D Power pre wash zone, power wash zone, 4 stage eco rinse and hot air drying zone.

- Alto 280CD Power pre wash zone, power wash zone, 4 stage eco rinse and corner hot air drying zone.

- Alto CP Corner power pre wash zone, power wash zone and 4 stage eco rinse.

- Alto 280 CPD Corner pre wash zone, power was zone, 4 stage eco rinse and hot air drying zone.

- Alto 280CPCD Corner power pre wash zone, power wash zone, 4 stage eco rinse and corner hot air drying zone.

Specifications

  • Product Type Rack Machines, Rack Conveyor Dishwashers
  • Range ALTO
  • Model Number
  • Order code ALTO 280
  • Dimensions2370 x 770 x 1565/2025mm
  • Rack Size 500 x 500mm
  • Electrical loadingHot fill 31.8kW / Cold fill 41.3kW
  • Chemical Dispensers Optional
  • Air gap / Air breakYes
  • Booster Pump Yes
  • Width2370 mm
  • Depth 770 mm
  • Height - Door open2025 mm
  • Height 1565 mm
  • Maximum plates per rack18
  • Wash chamber height 400 mm
  • Operating level<66 dB
  • Built in air gap (water council approved - WRC) Yes
  • Rinse Booster PumpYes
  • Built in detergent dispenser Optional
  • Built in rinse aid dispenserOptional
  • Double skinned cabinet Yes
  • Racks per hour105/210/280
  • Water connection 3/4
  • Water inlet height from floor level226 mm
  • Required water pressure 1 to 3 bar
  • Required water flow (inlet solenoid valve capacity at 3 bar)15 Ltrs/min
  • Maximum Drain Height from floor level 171 mm
  • Drain Size 1.5"
  • Amps required - 3 Phase - Water fed @ 40°C 50 Amps
  • Amps required - 3 Phase - Water fed @ 10°C63 Amps
  • Total connected load - Water fed @ 40°C 31.8 kW
  • Total connected load - Water fed @ 10°C41.3 kW
  • Pre wash tank heating 8 kW
  • Wash tank heating9.5 kW
  • Rinse boiler heating - Water fed @ 40°C 19 kW
  • Rinse boiler heating - Water fed @ 10°C28.5 kW
  • Pre wash pump size 0.8 kW
  • Pre wash pump capacity400 Ltrs/min
  • Pre wash tank capacity 45 Litres
  • Pre wash tank operating temperature45°C
  • Wash pump size 2 kW
  • Wash pump capacity900 Ltrs/min
  • Wash tank capacity 70 Ltrs
  • Wash tank operating temperature55 º C
  • 4 Eco stage rinse Yes
  • Rinse boiler operating temperature85 º C
  • Rinse water consumption 280 Ltrs/hr
  • Rinse boiler capacity17 Litres
  • Drying tunnel Optional
  • Corner drying tunnelOptional
  • Drying tunnel loading 6.4 kW
  • Drying tunnel length600 mm
  • Drying tunnel circulation 1150 m/3/hr
  • Drying tunnel relative humidity25%
  • Heat recovery unit Optional
  • Circulation700 m/3/hr
  • Reduction in electrical loading 5 kW
  • Steam condenser unitOptional
  • Cold water consumption 250 Ltrs/Hr
  • Exraction spigotOptional
  • Diameter 250 mm
  • Integral extraction fanOptional