Duo Undercounter Glasswasher

G400DUO & G400DUOWS

Our front-loading commercial glasswasher with digital display, two wash programs and full WRAS compliance for effortless and consistently clean results. The digital LCD display accurately shows the temperature of the wash tank and rinse boiler, re-assuring the operator that it is up to temperature and fully sanitising during the wash cycle.

The G400 DUO comes with all the benefits of our standard range plus:

• Two wash programs – standard (2 min) and light (1.5 min) cycles allow for maximum output without compromising wash quality.

• All Duo’s come with drain pumps, rinse booster pumps and built-in chemical dispensers to ensure they meet installation requirements.

• LCD display – enhances user functionality by displaying rinse and wash tank temperatures.

How to Buy Distributor Enquiries

Key Features

Simple Controls

Simple two-button main controls plus two additional smaller buttons for cycle selection, for improved user experience.

Water Board (WRAS) Compliant

All Duo machines have a 'Type A' air gap which completely prevents any dirty water from going back into the mains water supply (an essential and legal requirement).

Two Wash Programs

Standard (2 min) and light (1.5 min) cycles allow for maximum output without compromising wash quality.

Drain Pump

All Duo models come fitted with a drain pump — essential for when the drainage is either higher than the machine's waste outlet, or has to be pumped to a stand pipe.

Rinse Booster Pump

All Duo models have a rinse booster pump. This is essential for ensuring the rinse has the right pressure to thoroughly clean off all the detergent — especially in low water pressure areas.

Colour Coded Display

Amber flashing — Machine heating
Blue — Machine in cycle
Green — Machine ready

Benefits

Tech Specs

Dimensions

Hydraulic

Other

Performance

Electrical

Standard Configuration
Amps Required:
13A 1 Phase
Operating voltage:
220-240V / 1N~ / 50Hz
Total Connected Load:
2.85kW
Optional 3 Phase Configuration
Amps Required 3 Phase:
13A 3 Phase
Operating Voltage 3 Phase:
380-415V/3N/50Hz
Total Connected Load 3 Phase:
6.58kW
Optional 1 Phase Configuration
Amps Required 1 Phase:
30A 1 Phase
Operating Voltage 1 Phase:
220-240V/1N~/50Hz
Total Connected Load 1 Phase:
6.58kW

Support & Service